Beko WMB61222 Washing Machine
Before beginning to connect an water pipes make sure you have the water supply isolated.
1. First you will need to attach the Water Inlet Hose, this can be found inside the drum of the machine when delivered.
2. Locate the Water Inlet Connection at the back of the machine.
3. Connect the right angled end of the hose to the machine and tighten the nuts by turning it clockwise.
Warning: Only tighten the hose nuts by hand, never use tools when tightening the nuts.
4. Connect the other end of the hose to the mains water supply and tighten the nuts.
Warning: Only tighten the hose nuts by hand, never use tools when tightening the nuts.
5. Once both ends of the hose are connected and tightened, open the taps used to isolate the appliance and check for any water leaks.