Click each step to see the action. You can also click the picture or use the arrow keys.

  • Before beginning to connect an water pipes make sure you have the water supply isolated.
  • 1. First you will need to attach the Water Inlet Hose, this can be found inside the drum of the machine when delivered.
  • 2. Locate the Water Inlet Connection at the back of the machine.
  • 3. Connect the right angled end of the hose to the machine and tighten the nuts by turning it clockwise.
    Warning: Only tighten the hose nuts by hand, never use tools when tightening the nuts.
  • 4. Connect the other end of the hose to the mains water supply and tighten the nuts.
    Warning: Only tighten the hose nuts by hand, never use tools when tightening the nuts.
  • 5. Once both ends of the hose are connected and tightened, open the taps used to isolate the appliance and check for any water leaks.